ANR Electronics BGA Lab service is your answer for computer, laptop and the BGA repair of circuit board assemblies utilizing BGA devices. We take pride in being able to successfully rework difficult to rework components.ANR utilizes the most advanced rework tools available for BGA rework.
BGA Reballing Service Offered
|
ANR’s BGA reballing service is your choice for quick, cost effective quality BGA reballing. ANR can meet your needs with Quick Turn Quality Ball Grid Reballing.
|
| |
ANR is able to reball BGA’s down to .25mm Pitch as well as Mixed Pitch/Interstitial Patterns. We routinely convert Lead Free BGA’s back to Leaded BGA for our customers. This enables RoHS exempt manufacturers to continue a leaded process.
|
| |
| ANR is also a good choice for small quantities. We can cost effectively and quickly reball a single BGA if needed. |
- Conversion from Pb Free (RoHS) to SnPb
- Conversion from SnPb to Pb Free
- High Temp/Specialty Reballing
- Chip Salvage
- Lead free and Eutectic
|
| Step by Step Process |
- Bake Printed Circuit Board – Ball Grid Arrays to be removed and reballed must be “dry” prior to removing them from a Printed Circuit Board. The chip can be “dried” by baking the entire printed circuit board per JEDEC standards (usually 125 Degrees Centigrade for 24 hours or lower and longer if the Printed Circuit Board is also to be salvaged and other components on the PCB will not tolerate 125 Degrees C). This removes moisture from the chip (and printed circuit board) and eliminates the risk of “Popcorning” the internal dye of the Ball Grid Array. If baking is not performed and chip does “Popcorn”, the chip to be salvaged may be damaged. If “Popcorn” damage does occur, the Ball Grid Array is not repairable. “Popcorning” is often not visible to the naked eye and may only become apparent once the chip is placed back in service. eTech has the capacity to bake Printed Circuit Boards up to 33”x26” in size. We have multiple ovens and can accommodate a large quantity of Printed Circuit Boards and ball grid arrays at one time.
- Remove Ball Grid Array – ANR uses the most advanced SRT line of BGA rework equipment for Ball Grid Array removal. The BGA removal process is performed using custom thermal profiles for each Printed Circuit Board and BGA Location. Manufacturer’s guide lines are observed and our operators are trained to spot potential problems during the Ball Grid Array removal process.
- Bake Ball Grid Array – Ball Grid Arrays must be “dry” before our BGA reballing service can be attempted. BGA’s that were removed from “just baked” boards do not need to be re-baked if the BGA’s have not been subjected to moisture or humidity that exceeds their moisture rating after being removed from the printed circuit board. Ball Grid Arrays that have been exposed to moisture in excess of their manufacturers’ moisture rating are baked 24 hours at 125 Degrees Centigrade to “dry” the BGA (see JEDEC moisture charge this page). ANR’s philosophy is ‘If in doubt bake, because there is no such thing as too dry”.
- Site Dress Ball Grid Array – ANR dresses BGA’s by hand and under a microscope. Our operators remove the existing solder and clean the surface. Great care is taken to prepare the chip to condition that is similar to the BGA’s original condition prior being originally balled.
- BGA Inspection – ANR carefully inspects each BGA to be reballed under a microscope. We look for anything that might interfere with ANR's “superior” BGA reballing results.
- Paste High Temperature Ball Grid Array – Pasting is generally only required on High Temp Ball Grid Arrays to create a fillet around the High Temperature Solder Spheres (Usually Pb90/SN10) that do not themselves reach reflow temperature during the BGA reballing process.
- Place BGA Solder Spheres – ANR internally designs and creates custom tooling for the application of solder spheres on Ball Grid Arrays. This gives ANR unique flexibility within the industry to accommodate customer BGA reballing requirements down to .25mm pitch arrays, interstitial, mixed pitched arrays, non-standard arrays, and to provide quick turn BGA reballing of small quantities as well as expeditiously and cost effectively reball production quantities. We use top quality, high tolerance solder spheres in our BGA reballing process. We stock both standard and metric size solder spheres in Lead and Lead Free. We routinely have more than 1 million spheres in stock to quickly meet our customer’s BGA reballing needs.
- Reflow Ball Grid Array – Here at ANR, we use a conventional SMT oven to reflow ball grid arrays during the reflow process. Temperature profiles are created with Ball Grid Array manufacturing guidelines in mind. In fact, BGA reballing reflow process temperatures generally are cooler than temperatures used for the same chip to be reflowed back on a printed circuit board. The lower temperatures result from the fact BGA’s being reballed are exposed on both side of the chip rather than one side down on a printed circuit board as during a PCB build. Also the fact that only the mass of the reballed Ball Grid Array need be brought to reflow temperature helps lower necessary reflow temperatures.
- BGA Reball Inspection Process – each individual reballed BGA is inspected after leaving the reflow process under magnification for adequate reflow, co-planarity, bridged spheres or anything that might interfere with ANR’s “superior” BGA reballing results.
- Clean/Wash Reballed BGA – a combination of hand applied pressure, Isopropyl Alcohol and water are used to clean the reballed BGA to a like new cleanliness and appearance
- BGA Reball Inspection Process – each individual reballed BGA is again inspected after leaving the cleaning and washing process. ANR’s operators inspect under microscopes for cleanliness as well anything that might interfere with eTech’s “superior” BGA reballing results.
- Bake and mark Reballed BGA – Depending on the process and chemistry used, reballed BGA’s are re-baked at 125 Degrees Centigrade to ensure that the Ball Grid Array’s are “dry” and ready to encounter reflow temperatures during a Printed Circuit Board manufacturing process. When time is of the essence, ANR is also able to quickly reball ball grid arrays with same day service on small quantities of reballed ball grid arrays using no-clean chemistry and in house cleaning methods.
- Mark or Dot BGA – ANR’s standard practice when reballing ball grid arrays is to mark each chip, usually with a red dot on the top side of the ball grid array in the pin one corner. We can vary the color of the dot or use custom marking upon request
- Pack / Seal / Certificate of Compliance – Completed reballed ball grid arrays are vacuum packed and sealed in Moisture Proof/ESD bags. Moisture indicator strips and desiccant are included inside with the gall grid arrays. Externally we include a “Certificate of Compliance” for our reballing customers to have on file and for compliance with Internal Quality Control Guidelines.
|
